LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Engine Cooling System) >> Repair Instructions >> Fan Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.
    Fig 1: View Of Fan Clutch & Fan Blade
    GM367006Courtesy of GENERAL MOTORS CORP.
  1. Install the fan clutch bolts.
  2. Install the fan clutch onto the fan blade, if necessary.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fan clutch bolts.

    Tighten:  Tighten the bolts to 23 N.m (17 lb ft).

    4. Fig 2: View Of Fan Assembly Removed
    GM367004Courtesy of GENERAL MOTORS CORP.
  4. Install the fan blade.
    5. Fig 3: Using Special Tools For Fan Clutch
    GM362333Courtesy of GENERAL MOTORS CORP.
  5. Install the J 46406  and the J 41240-5A  to the fan clutch. See Special Tools and Equipment .

    Tighten:  Tighten the fan clutch nut clockwise to 56 N.m (41 lb ft).

  6. Install the upper fan shroud. Refer to Fan Shroud Replacement - Upper (W/O M74)  or Fan Shroud Replacement - Upper (W/M74) .
scientia non olet · About LEMON Manuals