Installation Procedure
WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the negative battery cable to vehicle.
- Install the nut to retain the negative battery cable to the right side frame rail.
Tighten: Tighten nut to 25 N.m (18 lb ft).
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
- Install the rear battery cover and nuts.
Tighten: Tighten nuts to 10 N.m (89 lb in).
- Lower the vehicle.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.