LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 686 (Engine Control System - 5.3L - Introduction) >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt
    GM260128Courtesy of GENERAL MOTORS CORP.
  1. Install the CMP sensor.
  2. Install the CMP sensor retaining bolt.

    Tighten:  Tighten the bolt to 29 N.m (21 lb ft).

  3. Connect the CMP sensor electrical connector.
  4. Install intake manifold. Refer to Intake Manifold Replacement .
scientia non olet · About LEMON Manuals