LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 686 (Engine Control System - 5.3L - Introduction) >> Repair Instructions >> Fuel Pressure Regulator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement in Engine Mechanical - 4.8L, 5.3L, 6.0L.
  2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
    3. Fig 1: Exploded View Of Fuel Rails & Injector Components
    GM350543Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the fuel pressure regulator vacuum line.
  4. Clean any dirt from the fuel pressure regulator retainer and the surrounding area.
  5. Remove the fuel pressure regulator retainer (8).
  6. Remove the fuel pressure regulator (9) from the fuel pressure regulator housing.
scientia non olet · About LEMON Manuals