High Mounted Stop Lamp Replacement: Notes

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 25070 Heat Gun
Varnish Makers and Painters (VMP) Naptha
Plastic Flat-Bladed Tool - Deburr any sharp or rough edges on the plastic tool to prevent scratching of the paint finish.

IMPORTANT:

Maintain body surfaces and adhesive tapes between 21-38°C (70-100°F) during installation.
Never apply adhesive tapes when the body surface and tape is below 21°C (70°F).