Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Memory Seat Control Module to Seat Screw

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Position the memory seat control module in the mounting bracket.
Install the screw (1) securing the memory module to the seat.
Tighten: Tighten the memory seat control module screw to 1.5 N.m (13 lb in).

Fig 2: Identifying Memory Seat Control Module & Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the 4 electrical connectors (2) to the memory seat control module (1).
Install the seat in the vehicle. Refer to Seat Replacement .