Cruise Control Module: Service and Repair

CRUISE CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the upper fender brace bolts.
2. Remove the upper fender brace.




3. Disconnect the cruise control module electrical connector.




4. Remove the cruise control module nuts.
5. Disconnect the cruise control cable from the module.
6. Remove the cruise control module.

INSTALLATION PROCEDURE
1. Install the cruise control module.
2. Connect the cruise control cable to the cruise control module.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the cruise control module nuts.

Tighten
Tighten the nuts to 9 N.m (80 lb in).




4. Connect the cruise control module electrical connector.




5. Install the upper fender brace.
6. Install the upper fender brace bolts.

Tighten
Tighten the bolts to 9 N.m (80 lb in).