LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Tracker 2WD V6-2.5L VIN 1 >> Repair and Diagnosis >> Heating and Air Conditioning >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions

SCAN TOOL DATA DEFINITIONS

A/C Relay Command: The parameter will indicate on whenever the A/C idle-up signal is received by the powertrain control module (PCM) from the A/C compressor control module. This will allow the PCM to adjust the engine idle to maintain acceptable engine performance.

ECT Sensor: The scan tool range is -40°C to +205°C (-40°F to +401°F). The engine coolant temperature (ECT) sensor is a thermistor which changes internal resistance as temperature changes.When the sensor is cold (internal resistance high), the PCM monitors a high signal voltage and interprets the voltage as a cold engine. As the sensor warms (internal resistance decreases), the voltage signal decreases and the PCM interprets the lower voltage as a warm engine.

Fan Request: The electric engine coolant fan is only on vehicles equipped with air conditioning. The scan tool displays on whenever the A/C is engaged or whenever the PCM commands the condenser fan on. The PCM commands the fan on for A/C operation and when an overheating condition exists (ECT 110°C (230°F) or higher).
scientia non olet · About LEMON Manuals