Connecting Rod, Engine

Connecting Rod Bearing Cap Nuts 45 Nm (33 ft. lbs.)

Connecting Rod Bow-Maximum 0.050 mm (0.0020 inch)
Connecting Rod Side Clearance-Maximum 0.45 mm (0.0177 inch)
Connecting Rod Side Clearance-Standard 0.25-0.40 mm (0.0099-0.0157 inch)
Connecting Rod Twist-Maximum 0.10 mm (0.0039 inch)
Crankshaft Diameter Out-of-Round and Taper-Maximum 0.01 mm (0.0004 inch)
Crankshaft Diameter-Standard 49.982-50.000 mm (1.9678-1.9685 inch)
Crankshaft Diameter - 0.25 mm (0.0098 inch) Undersize 49.732-49.750 mm (1.9580-1.9586 inch)