LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Body Front End) >> Specifications >> Fastener Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Door Jamb Switch Screw 6 N.m 53 lb in
Electrical Center Mounting Bolt/Screw 2 N.m 18 lb in
Fender Upper Edge Screws 11 N.m 97 lb in
Front Fender Liner Rear Bottom Bolts 2 N.m 18 lb in
Front Fender Liner to Front Bumper Fascia Bolts 2 N.m 18 lb in
Fender Splash Shield Screws 2 N.m 18 lb in
Fender to Front Bumper Fascia Bolts 11 N.m 97 lb in
Fender to Rear Edge Bolts 11 N.m 97 lb in
Front End Sheet Metal Diagonal Brace at Upper Tie Bar Bolts 25 N.m 18 lb ft
Front End Sheet Metal Diagonal Brace at Wheelhouse Bolt 47 N.m 34 lb ft
Grille Screws 4 N.m 35 lb in
Hood Hinge to Hood Bolts 25 N.m 18 lb ft
Hood Hinge to Upper Fender Rail Bolts 25 N.m 18 lb ft
Hood Latch (Primary) at Support Bolts 25 N.m 18 lb ft
Hood Latch (Primary) Bolts 25 N.m 18 lb ft
Hood Prop Rod Base Bolts 10 N.m 89 lb in
Hood Scoop Screws 6 N.m 53 lb in
Latch (Secondary) to Hood Bolts 25 N.m 18 lb ft