LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 409 (Theft Deterrent System) >> Repair Instructions >> LED Indicator Replacement - Vehicle Security System >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the security indicator lamp electrical connector to the security indicator lamp.
  2. Install the security indicator lamp to the instrument panel upper trim:
    1. 2.1. Insert the lamp.
    2. 2.2. Rotate the lamp clockwise to approximately 1/4 turn.
  3. Install the instrument panel upper trim. Refer to TRIM PAD REPLACEMENT - IP UPPER .
Fig 1: Connecting Security Indicator Lamp Electrical Connector To Security Indicator Lamp
G01813556Courtesy of GENERAL MOTORS CORP.