LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 429 (Wheel Alignment Specifications & Adjustment Procedures) >> Specifications >> Fastener Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Strut Lower Nuts (1) 123 N.m 90 lb ft
Tie Rod Jam Nuts 68 N.m 50 lb ft
(1) This is a prevailing torque type fastener. This fastener may be reused ONLY if:
  • The fastener and its counterpart are clean and free from rust.
  • The fastener develops a specified amount of torque/drag against its counterpart prior to the fastener seating. Refer to the appropriate service procedure for the prevailing torque value.

If the fastener does not meet these criteria, REPLACE the fastener.
scientia non olet · About LEMON Manuals