LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Support Cable Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Identifying Lumbar Support Cable Housing
    GM506786Courtesy of GENERAL MOTORS CORP.
  1. Install the lumbar support cable and housing to the bucket seat cushion frame.
    2. Fig 2: View Of Lumbar Support Cable Clip
    GM506827Courtesy of GENERAL MOTORS CORP.
  2. Install the lumbar support cable to the side of the bucket seat cushion frame.
  3. Install the lumbar support cable clip.
  4. Install the bucket seat cushion cover and pad. Refer to Seat Cushion Cover Replacement - Front (YC5 and YC6)  or Seat Cushion Cover Replacement - Front (YC7) .
    5. Fig 3: View Of Lumbar Plate
    GM506820Courtesy of GENERAL MOTORS CORP.
  5. Install the lumbar plate to the seat back frame.
    6. Fig 4: Aligning Lumbar Plate
    GM506791Courtesy of GENERAL MOTORS CORP.
  6. Snap the corners of the lumbar plate to the seat back frame.
    7. Fig 5: Identifying Lumbar Plate Cable
    GM506778Courtesy of GENERAL MOTORS CORP.
  7. Connect the lumbar plate cable (1) to the lumbar plate.
  8. Install the seat back cover and pad to the seat back frame. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6)  or Seat Back Cover and Pad Replacement (YC7) .
  9. Install the bucket seat in the vehicle. Refer to Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals