LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Power Take-Off System) >> Repair Instructions >> Power Take-Off (PTO) Switch Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  1. Install the PTO switch to the housing
  2. Connect the wire connector to the switch.
  3. Install the switch housing to the I/P till it clicks into place.
  4. Install the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals