LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - (Introduction) Specifications & Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
    2. Fig 1: Identifying Fuel Sender Assembly
    GM371000Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the fuel pump electrical connector (5).
  3. Remove the fuel level sensor electrical connector retaining clip (6).
  4. Disconnect the fuel level sensor electrical connector (7) from under the fuel sender cover.
  5. Remove the fuel level sensor retaining clip (4).
  6. Squeeze the locking tangs and remove the fuel level sensor (3).
scientia non olet · About LEMON Manuals