LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Classic >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System (Introduction) - 2.2L (L61) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Turn OFF the ignition.
    2. Fig 1: IAT Sensor & Harness Connector
    GM785336Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the intake air temperature (IAT) harness connector.
  3. Remove the IAT sensor using a twisting and pulling movement.
scientia non olet · About LEMON Manuals