LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Classic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Guide Replacement - Rear Seat Shoulder Belt >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: View Of Child Shoulder Belt Rerouter, Guide & Push-Pin Retainer
    GM891567Courtesy of GENERAL MOTORS CORP.
  1. Install the shoulder belt to the rerouter guide (3) if required.
  2. Align the rerouter (1) to the lower quarter panel or to the lower quarter trim panel.
  3. Press the push-pin retainer (2) into the rerouter (1) until fully engaged.
  4. Install the stationary rear seat back, or the seat back bolsters if equipped with a split rear folding seat back, if necessary. Refer to Seat Back Replacement - Rear or to Seat Back Bolster Replacement - Rear Split Folding in Seats.
scientia non olet · About LEMON Manuals