LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Cobalt SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.0L - (Introduction) >> Repair Instructions >> Temperature Manifold Absolute Pressure (TMAP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Locating TMAP Sensor
    GM1382191Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the temperature manifold absolute pressure (TMAP) sensor harness connector.
  2. Remove the TMAP sensor from the intake manifold.
  3. IMPORTANT: If the TMAP sensor seal is damaged, the TMAP sensor must be replaced.
  4. Inspect the seal for damage.