LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala LS >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    IMPORTANT:
    • Never use a hammer to install the power steering pulley.
    • Do not use an arbor press to install the power steering pulley.
    • The face of the pulley hub must be flush with the end of the pump driveshaft.
  1. Using J 25033-C  install the power steering pump pulley to the power steering pump. See Special Tools .
    2. Fig 1: Removing/Installing Power Steering Pump Assembly
    GM293353Courtesy of GENERAL MOTORS CORP.
  2. Install the power steering pump assembly to the vehicle. Refer to Power Steering Pump Replacement (3.4L)  or Power Steering Pump Replacement (3.8L) .
scientia non olet · About LEMON Manuals