Installation Procedure

Fig 1: View Of Wiper Switch And Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector from the wiper switch. Connect the cruise control connector, if so equipped.
Install the wiper switch by snapping it into the switch housing.

Fig 2: Identifying Steering Column Cover Panel Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.
Tighten: Tighten the upper and the lower steering column cover panel screws to 2.5 N.m (22 lb in) .
Connect the negative battery cable.