LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Wiper System And Washer System) >> Repair Instructions >> Windshield Outside Moisture Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Rain Sensor Module
    GM746991Courtesy of GENERAL MOTORS CORP.
  1. Connect the windshield outside moisture sensor electrical connector.
  2. Position the windshield outside moisture sensor to the windshield coupler.
  3. Fasten the windshield coupler retainer clips.
    4. Fig 2: Removing/Installing Windshield Outside Moisture Sensor Cover
    GM746989Courtesy of GENERAL MOTORS CORP.
  4. Position the trim cover to the windshield outside moisture sensor.
  5. Press the trim cover inward to secure the trim cover to the windshield outside moisture sensor.
scientia non olet · About LEMON Manuals