LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L - Introduction >> Repair Instructions >> Crankshaft Position (CKP) Sensor Replacement (CKP sensor B) >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: View Of CKP Sensor (7X)
    GM15969Courtesy of GENERAL MOTORS CORP.
  1. Turn OFF the ignition.
  2. Crank steering wheel fully to the left.
  3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  4. Remove the right tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Disconnect the crankshaft position (CKP) sensor electrical connector.
  6. Remove the attaching bolt/screw.
  7. Remove the CKP sensor from the engine.
  8. Inspect for wear, cracks, or leakage if the CKP sensor is not being replaced.
scientia non olet · About LEMON Manuals