LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Electronic Suspension System - Automatic Level Control) >> Repair Instructions >> Automatic Level Control Air Compressor Head Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the automatic level control air compressor from the vehicle. Refer to Air Compressor Replacement .
  2. Remove the air dryer from the automatic level control air compressor. Refer to Automatic Level Control Air Dryer Replacement .
  3. Fig 1: Automatic Level Control Air Compressor Head
    G01828555Courtesy of GENERAL MOTORS CORP.
  4. Remove the wiring terminals B and C from the automatic level control air compressor electrical connector.
  5. Remove the bolts/screws from the automatic level control air compressor head (2).
  6. Remove the automatic level control air compressor head.
  7. Remove the O-ring (3) from the automatic level control air compressor.