Installation Procedure
- Properly route the automatic transaxle range selector cable through the engine compartment.
- Install the automatic transaxle range selector cable through the cowl.
- Install the automatic transaxle range selector cable to the steering column bracket.
- Install the retaining clip to the automatic transaxle range selector cable.
- Install the automatic transaxle range selector cable to the column control lever.
- Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages and Console.
- Install the automatic transaxle range selector cable to the automatic transaxle range selector cable bracket.
- Install the automatic transaxle range selector cable to the automatic transaxle range selector lever.
- Install the retaining clip to the automatic transaxle range selector cable.
- Adjust the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Adjustment .
- Install the throttle body air inlet duct. Refer to Air Cleaner Element Replacement in Engine Controls - 3.4L.