Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cruise Control Module, Cruise Control Bracket & Nuts

Courtesy of GENERAL MOTORS CORP.

Install the cruise control module (3) to the vehicle.
Install the cruise control module (3) to the cruise control bracket (1).

NOTE: Refer to Fastener Notice .

Install the nuts (2) that retain the cruise control module (3) to the cruise control bracket (1).
Tighten: Tighten the nuts to 5 N.m (44 lb in).
Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement .
Connect the electrical connector to the cruise control module.
Install the air cleaner assembly to the vehicle.
- For the 4.3L engine, refer to Air Cleaner Assembly Replacement .
- For the 4.8L, 5.3L, or 6.0L engine, refer to Air Cleaner Assembly Replacement .
Close the hood.
Refer to Control Module References for programming and setup information.