LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Epica LTZ >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.0L (L34 GMDAT) - Service And Repair >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the air intake tube and resonator.
  3. Fig 1: View Of TP Sensor And Connector
    GM1256153Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the throttle position (TP) sensor connector.
  5. Remove the TP sensor retaining bolts and the TP sensor.