LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Malibu SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.9L - Introduction (2 Of 2) >> Repair Instructions >> Intake Manifold Tuning Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Apply Lubricate To Valve Blade
GM1580024Courtesy of GENERAL MOTORS CORP.
  1. Apply lubricate GM P/N 1051344 (Canadian P/N 993037) to the nose of the valve blade (1).
    NOTE: Refer to FASTENER NOTICE .
    Fig 2: Installing Intake Manifold Tuning Valve
    GM1557831Courtesy of GENERAL MOTORS CORP.
  2. Install the intake manifold tuning valve.
  3. Install the intake manifold tuning valve bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  4. Install the power steering pump. Refer to POWER STEERING PUMP REPLACEMENT .
    Fig 3: Connecting Intake Manifold Tuning Valve Electrical Connector
    GM1582090Courtesy of GENERAL MOTORS CORP.
  5. Install the engine harness clip to the power steering reservoir bracket.
  6. Connect the intake manifold tuning valve electrical connector (1).
  7. Install the intake manifold cover. Refer to INTAKE MANIFOLD COVER REPLACEMENT .
scientia non olet · About LEMON Manuals