LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction (2 Of 2) >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Removing/Installing Breather Pipe To/From Air Intake Duct
    GM1530323Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Remove the breather pipe from the air intake duct.
    3. Fig 2: Disconnecting/Reconnecting Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Connector
    GM1530328Courtesy of GENERAL MOTORS CORP.
  3. Remove the electrical connector for MAF/IAT sensor replacement.
    4. Fig 3: Removing/Installing Air Ducts
    GM1530789Courtesy of GENERAL MOTORS CORP.
  4. Loosen the clamps on the air intake duct.
  5. Remove the air intake duct.
    6. Fig 4: Identifying MAF/IAT Sensor
    GM1275969Courtesy of GENERAL MOTORS CORP.
  6. Remove the MAF/IAT (1) sensor and clamp (2) from the air cleaner assembly.
scientia non olet · About LEMON Manuals