LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Spark Plug Wire Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Spark Plug Wire Routing Engine Right Side
    GM1299397Courtesy of GENERAL MOTORS CORP.
  1. Install the spark plug wires (1,3 and 5) to the ignition coils.
  2. Install the spark plug wires (1,3 and 5) to the engine right side spark plugs.
  3. Install the spark plug wires to the retaining clip.
  4. Rotate engine back to original position. Refer to Rotating the Engine for Service Access .
    5. Fig 2: Spark Plug Wire Routing Engine Left Side
    GM1299208Courtesy of GENERAL MOTORS CORP.
  5. Install the spark plug wires (2,4 and 6) to the ignition coils.
  6. Install the spark plug wires (2,4 and 6) to the engine left side spark plugs.
  7. Install the spark plug wires to the retaining clips.
scientia non olet · About LEMON Manuals