LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Seat System) >> Repair Instructions >> Drive Cable Replacement - Horizontal >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Power Seat Components
    GM817977Courtesy of GENERAL MOTORS CORP.
  1. Insert the end of one cable (4) into the drive screw (3).
  2. Bend the cable and insert the other end into the motor (1).
    3. IMPORTANT: Examine all 4 drive cables to ensure that the cables are straight.
  3. Connect the electrical connector to the seat wire harness and test the seat for proper operation.
  4. Examine the horizontal drive cables for synchronization. Refer to Seat Adjuster Phase Adjustment - Power.
  5. Install the front seat. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals