LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Stationary Window System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Connect the OnStar® connector, if equipped.
  3. Fig 1: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  4. Connect the rear window defogger electrical connector, if equipped.
  5. Fig 2: Rear Window Radio Antenna Connector
    GM181953Courtesy of GENERAL MOTORS CORP.
  6. Connect the rear window radio antenna connector.

  7. Connect the OnStar® system.
  8. Verify the radio and the OnStar® has reception.
  9. Close the rear compartment lid.
  10. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.