Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Slide The Fuel Level Sensor Onto The Bucket And Upward

Courtesy of GENERAL MOTORS CORP.

Slide the fuel level sensor (1) onto the bucket and upward.

Fig 2: Slide The Fuel Level Sensor Upward Until The Retainer Locks

Courtesy of GENERAL MOTORS CORP.

Slide the fuel level sensor upward until the retainer (1) locks.

Fig 3: Connect The Fuel Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the fuel level sensor electrical connector (1).
Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .