Installation Procedure
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to Fastener Notice
.
- Install the strut to the vehicle. Refer to Strut, Strut Component and/or Spring Replacement
.
Tighten: Tighten the strut-to-knuckle nuts as far as to allow movement of the knuckle.
- Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
- Adjust the camber (1).
Tighten: Tighten the strut-to-knuckle nuts to 130 N.m (96 lb ft).
- Lower the vehicle.