LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Disc Brake System) >> Repair Instructions >> Front Disc Brake Hardware Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Pin Bolts & Boots
    GM793825Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the bores (3), the inside part of the bolt boot (2) and the caliper pin bolts (4) with GM P/N 18047666, or equivalent.
  2. Press the new caliper pin bolt boots into the caliper pin bores.
  3. Install the brake caliper bracket. Refer to Brake Caliper Bracket Replacement - Front .
    4. Fig 2: View Of Brake Pads, Brake Pad Retainers, & Caliper Bracket
    GM727742Courtesy of GENERAL MOTORS CORP.
  4. Install the brake pad retainers (1) to the caliper bracket.
  5. Install the brake pads (2) to the caliper bracket.
    6. Fig 3: View Of Brake Caliper And Caliper Bracket
    GM178630Courtesy of GENERAL MOTORS CORP.
  6. Remove the heavy mechanics wire (1) and install the brake caliper. Refer to Brake Caliper Replacement - Front .
scientia non olet · About LEMON Manuals