Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Instrument Panel Cluster (IPC)
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| IPC Gauge Sweep Test | Special Functions | The instrument panel cluster (IPC) drives all of the gages at or below minimum for a few seconds when you select ON, then drives all of the gages at or above maximum for a few seconds. The IPC Display Test will end after one cycle of the gages sweep. |
| Displays Test | Special Functions | The IPC illuminates all of the indicators for 7 seconds when you select ON. The IPC turns off the indicators after the 7 seconds. |
| Dimming | Special Functions | The IPC increases or decreases the dimming intensity in increments of 20 percent between a range of 0-100 percent. |
Engine Control Module (ECM)/Powertrain Control Module (PCM)
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Special Functions | Malfunction Indicator Lamp (MIL) | The engine control module (ECM)/Powertrain Control Module (PCM) commands the MIL indicator ON and OFF. |