Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Tire Pressure Monitor (TPM) Option | TPM Option Enable | After replacing the remote control door lock receiver (RCDLR), the scan tool must be used to enable the TPM option, refer to Control Module References
. After the TPM option is enabled, it can not be disabled. |
| Vehicle Tire Type and Tire Pressure | Tire Type/Pressure Selection | After replacing the RCDLR, the scan tool must be used to select the correct tire type and the front and rear tire pressures for the vehicle, refer to Control Module References . |