LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander LT, 3.9 1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.9L - Introduction (2 Of 2) >> Repair Instructions >> Engine Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Using a scan tool, retrieve the percentage of remaining engine oil. Record the remaining engine oil life.
    2. Fig 1: Identifying Battery & Powertrain Control Module (PCM)
    GM1544730Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE .
  3. Remove the left sheet metal diagonal brace. Refer to BRACE REPLACEMENT - SHEET METAL DIAGONAL .
  4. Loosen the air cleaner cover screws and remove the cover (1) from the air cleaner assembly (3).
  5. Disconnect the engine harness electrical connectors (4) from the ECM.
  6. Remove the ECM (2) from the air cleaner cover.
scientia non olet · About LEMON Manuals