Circuit/System Testing

Ignition OFF, inspect the CMP sensor for looseness and correct installation.
- If the sensor is loose, inspect the sensor and the O-ring for damage, replace as necessary.
Inspect the engine for the following conditions:
- Engine oil for debris
- Camshaft reluctor wheel for damage
- The timing chain, tensioner, and sprockets for wear or damage

If debris is found in the engine oil, inspect the internal engine components to determine the cause. Repair or replace any worn or damaged components. Refer to TIMING CHAIN AND SPROCKETS CLEANING AND INSPECTION and CAMSHAFT AND BEARINGS CLEANING AND INSPECTION .