LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1211 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Side Impact Module Wiring Harness
    GM1506504Courtesy of GENERAL MOTORS CORP.
  1. Install the new side impact module wiring harness (1) to the seat.
  2. Install the retaining clips that fasten the side impact module wiring harness (1) to the seat.
  3. Install the side impact module to the seat. Refer to Driver or Passenger Seat Side Inflatable Restraint Module Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals