Pedal Positioning Module: Service and Repair

Adjustable Pedal Module Replacement

Removal Procedure

1. Remove the left side instrument panel insulator panel.




2. Carefully cut and remove the tie strap securing the adjustable pedal module to the I/P support beam.
3. Remove the adjustable pedal module (1) from the side of the I/P support beam.
4. Disconnect the electrical connector from the adjustable pedal module.

Installation Procedure




1. Remove the old 2-sided tape from the I/P support beam.
2. If reinstalling the same adjustable pedal module, install NEW 2-sided tape to the module.
3. Connect the electrical connector to the adjustable pedal module.
4. Install the adjustable pedal module (1) to the side of the I/P support beam.
5. Install a NEW tie strap to secure the adjustable pedal module to the I/P support beam.
6. Install the left side instrument panel insulator panel.