LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Automatic Level Control >> Repair Instructions >> Automatic Level Control Relay Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: View Of Electrical Connector For Automatic Level Control Relay
    GM878218Courtesy of GENERAL MOTORS CORP.
  1. Connect electrical connector (1) into the automatic level control relay (2).
  2. Fig 2: Locating Mounting Screw For Automatic Level Control Relay
    GM878217Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install mounting screw (1) into the automatic level control relay.

    Tighten:  Tighten screw to 6 N.m (53 lb in).

  4. Lower the vehicle.