LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Chevy Express G2500, Van Passenger >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.8L, 5.3L Or 6.0L - Introduction >> Repair Instructions >> Fuel Pump Flow Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Chassis Wiring Harness Electrical Connector & Fuel Pump Flow Control Module
    GM1931044Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the chassis wiring harness electrical connector (2) from the fuel pump flow control module (1).
  3. Fig 2: View Of Fuel Pump Flow Control Module & Bolts
    GM1931045Courtesy of GENERAL MOTORS CORP.

    Remove the fuel pump flow control module bolts (1).
  4. Remove the fuel pump flow control module (2) from the frame.
scientia non olet · About LEMON Manuals