LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L, Or 7.0L - DTC P0153 To DTC P0507 >> DTC P0336 >> Component Testing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Testing

NOTE: You must perform the Circuit/System Testing before proceeding with Component Testing.
  1. Inspect the CKP sensor for correct installation. Remove the CKP sensor from the engine and inspect the sensor O-ring for damage.
    • If the sensor is loose, incorrectly installed, or damaged, replace the CKP sensor.
  2. Connect the CKP sensor harness connector to the CKP sensor.
  3. Ignition ON, engine OFF. Observe the CKP Active counter parameter on the scan tool.
  4. Pass a flat steel object across the tip of the sensor repeatedly. The CKP Active counter parameter should increment with each pass of the steel object.
    • If the parameter does not increment, replace the CKP sensor.