LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Engine Controls And Fuel - 2.9L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Tank Module Locking Tab
    GM1766564Courtesy of GENERAL MOTORS CORP.
  1. Align the edges of the fuel level sensor with the slots in the module bucket.
  2. Slide the fuel level sensor into position, ensure the locking tab (1) is fully engaged.
  3. Connect the fuel level sensor electrical connector to the module cover.
  4. Install the fuel tank module. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals