LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: View Of Fuel Pump Module
    GM1636703Courtesy of GENERAL MOTORS CORP.
  1. Carefully slide the fuel level sensor into the slots on the reservoir.
  2. Slide the sensor down until the retaining tabs (2) engage the sensor.
  3. Install the fuel pump module. Refer to Fuel Pump Module Replacement .