LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1331 (Disc Brake System) >> Repair Instructions >> Rear Brake Backing Plate Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wheel Bearing/Hub Assembly Nuts
    GM1276112Courtesy of GENERAL MOTORS CORP.
  1. Install the shield to the wheel knuckle.
  2. Install the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement .