LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Impala SS >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation, And Air Conditioning >> Repair Instructions >> Blower Motor Control Module Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Blower Motor Control Module Replacement

Fig 1: Replacing Blower Control Module
GM1614108Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the right closeout insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Disconnect the blower motor resistor electrical connector.
1 Blower Motor Resistor Screw (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tip:  Remove the heat stakes that secure the blower motor resistor to the HVAC module assembly using a small chisel.

Tighten:  1.5 N.m (13 lb in)
2 Blower Motor Resistor
Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals