Installation Procedure

Fig 1: View Of CMP Sensor Bolt & Sensor

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the CMP sensor (4) and bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb in).

Fig 2: Identifying Intake & Exhaust Camshaft Position (CMP) Sensors

Courtesy of GENERAL MOTORS CORP.

Connect the engine wiring harness electrical connector (3) to the bank 2 exhaust CMP sensor (4).
Install the engine mount strut bracket. Refer to ENGINE MOUNT STRUT BRACKET REPLACEMENT - RIGHT SIDE .