Brake Fluid Level Indicator Switch Replacement

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Fluid Level Indicator Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the air cleaner housing cover and duct. Refer to Air Cleaner Element Replacement . Remove the windshield washer solvent heater. Refer to Windshield Washer Solvent Heater Replacement (Traverse) , Windshield Washer Solvent Heater Replacement (Acadia and Enclave) .
1	Master Cylinder Fluid Level Sensor Procedure Disconnect the electrical connector. Compress the locking tabs on the sensor to release the sensor from the brake master cylinder reservoir.

Callout

Component Name

Preliminary Procedures

Remove the air cleaner housing cover and duct. Refer to Air Cleaner Element Replacement .
Remove the windshield washer solvent heater. Refer to Windshield Washer Solvent Heater Replacement (Traverse) , Windshield Washer Solvent Heater Replacement (Acadia and Enclave) .

Master Cylinder Fluid Level Sensor

Procedure

Disconnect the electrical connector.
Compress the locking tabs on the sensor to release the sensor from the brake master cylinder reservoir.