LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Mirror System) >> Diagnostic Information and Procedures >> DTC B1722 >> Circuit/System Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Testing

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X1 harness connector at the appropriate outside rearview mirror.
  2. Connect a test lamp between control circuit terminal 1 and control circuit terminal 2.
  3. Command the Mirror Fold to Retract and Extend with a scan tool. The test lamp should turn ON when commanding the retract and extend states.
    • If the test lamp remains OFF during either of the commands, test for a short to voltage, short to ground, or an open/high resistance on either control circuit. If the circuits test normal, replace the door module.
  4. If all circuits test normal, test or replace the outside rearview mirror.
scientia non olet · About LEMON Manuals